> News >

Winch brake band remove

May 06, 2019
The winch brake band removal procedure is as follows:
1. Loosen the two nuts of the adjustment bolt.
2. Start the engine, run at low speed and unload, and select the brake mode as key.
3. Turn the brake mode switch to the "free" mode, and unlock the brake pedal after the reel has been locked.
4. Remove the two nuts and remove the adjusting bolt from the brake band.
5. Use the small hoist to lift the movable end brake band, remove the brake band mounting pin and lock plate, then remove the brake band.
6. Use the small hoist to lift the fixed end brake band, remove the brake band mounting pin and lock plate, and remove the brake band.
 
winch
Top